CR003 LF EM4200 EM4100 TK4100 4100D UART WG26 / WG34 onye na-agụ modul 3v ma ọ bụ 5V
Ozi bụ isi
25khz LF RFID Module Reader EM4200 EM4100 TK4100 UART / Weigand Mode
CR003 bụ naanị modul 125K na-agụ EM4200 EM4100 TK4100 UART ma ọ bụ Weigand Mode nke nwere ụdị 3v ma ọ bụ 5v yana nha DIP28.
Njirimara arụ ọrụ na nke anụ ahụ
Aha | Usoro CR003 Proximity Reader Module | |||
Ibu | 12g | |||
Akụkụ | 40mm (L) x20mm(H) x8mm(W) | |||
Okpomọkụ | -40 一s+85C | |||
Interface | COMS UART ma ọ bụ WG | |||
Gụọ Oke | ruo 8-12 cm | |||
Ugboro ugboro | 125KHZ | |||
Kwesịrị ekwesị maka | uEM 4001 ma ọ bụ dakọtara | |||
EM4200, EM4100,TK4100,HT4168,4100D | ||||
Achọrọ ike | DC3.0- 5.5V, 30ma - 50ma | |||
MCU | 51-8-bit CPU |
Nkọwa Pin & Ụdị data mmepụta
Pin Mba. | Nkọwa | CR003T (ASCII) | CR003W (Wiegand) | CR003M | CR003A (ABAⅡ) |
Ntụtụ 1 | D1 | Mbupute data TTL (Tx) | DATA1 mmepụta | Koodu mmepụta dataManchester | Mmepụta DATA |
Ntụtụ 2 | D0 | NC | DATA0 mmepụta | NC | CLK |
Ntụtụ 3 | CS | NC | NC | NC | CP |
Ntụtụ 4 | GND | GND | |||
Ntụtụ 5 | VCC | IKE (+4.6V - +5.4V DC) | |||
Ntụtụ 15 | ANT1 | Antenna (L1=1000uH) | |||
Ntụtụ 16 | ANT2 | Maka antenna | |||
Ntụtụ 26 | GND | GND | |||
Ntụtụ 27 | VCC | IKE (+4.6V - +5.4VDC) | |||
Ntụtụ 28 | BEEP/LED | BEEPER/LED | BEEPER/LED | NC | BEEPER/LED |
* Pin28 bụ onye ọkwọ ụgbọ ala PEEPER / LED, mgbe mmepụta data gasịrị, edobere Pin28 dị ala
CR003W01 = Wiegand26
CR003W02 = Wiegand26/34 Gbanwee
CR003W03 = Wiegand34
Ụdị data
CR003T-01Nhazi data mmepụta – ASCII(RS232.TTL) 9600bps, N,8,1
STX (02H) | DATA (10 ASCII) | LRC (2 ASCII) | CR | LF |
ETX (03H) |
[The 1byte (2 ASCII charaters), LCR bụ Longitudinal Redundancy Check.]
Ọmụmaatụ:Data: 62h 08h 0CH 6CH, LRC: (E3H) XX30 0x30 0x30 0x30 0x30 0x38 0x0D 0x0A 0x0A 0x0A 0x0A
CR003T-02Nhazi data mmepụta – ASCII(RS232.TTL) 9600bps, N,8,1
STX (02H) | DATA (10 ASCII) | LRC (1BYTEI) | ETX (03H) |
[The 1byte (2 ASCII charaters), LCR bụ Longitudinal Redundancy Check.]
Ọmụmaatụ:Data: 62h 08h 0CH 6CH, LRC: (E3H) XX36 0x36 0x36 0x43 0x44 0x08 0x08 0x08 0x08 0x08 0x08 0x08 0X03
CR003T-03Nhazi data mmepụta – ASCII(RS232.TTL) 9600bps, N,8,1
DATA (10 ASCII) | CR |
[The 1byte (2 ASCII charaters), LCR bụ Longitudinal Redundancy Check.]
Ọmụmaatụ:Data: 62H E3H 08H 6CH EDH,
Mpụta: 0X36 0X32 0X45 0X33 0X30 0X38 0X36 0X43 0X45 0X44 0X0D
CR003WNhazi data mmepụta, Dịka ọmụmaatụ: Wiegand 26 bit
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 |
P(1) | E | E | E | E | E | E | E | E | E | E | E | E | O | O | O | O | O | O | O | O | O | O | O | O | P(2) |
Ọbụlagodi Mmakọ(E) | ODD Parity(O) |
P(1):Parity Start Bit, 2-13 bit even Parity bit
P(2):Parity Stop Bit, 14-26 bit ODD Parity bit
Weigand
Ụdị data: